Default Password for ZyXEL ZyWall 10 Router

To get access to ZyXEL ZyWall 10 router, you need the login IP address of your router, the username, and password.

You can find these data in ZyXEL ZyWall 10 router manual. But if you lost it, then you can use the quick guide below.

Login to the ZyXEL ZyWall 10 Router

The ZyXEL ZyWall 10 has a web interface for configuration. You can use any web browser you like to log in to the ZyXEL ZyWall 10 router.

Put the Login IP Address of your ZyXEL ZyWall 10 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZyXEL ZyWall 10 login infomation.

Default login data for ZyXEL ZyWall 10

You need to know the username and password to log in to your ZyXEL ZyWall 10 router. We listed below.

ModelIpUsername & Password
ZyXEL ZyWall 10192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other ZyXEL ZyWall 10 Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of ZyXEL ZyWall 10 Doesn't Work

You should try the other same brands' passwords. We have a large list of Brands' Passwords that you can have a try to check. Perhaps your router's default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

Forgot Password to ZyXEL ZyWall 10 Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router's username and password are, or maybe they can reset it for you.

How to Reset the ZyXEL ZyWall 10 Router To Default Settings

If you still can not get logged in, then you have to reset your router to its default settings.

Change ZyXEL ZyWall 10 Default Wifi Name (SSID)

By default, some ZyXEL ZyWall 10 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router's brand, which makes it easier for hackers.

Configure Wireless MAC address filter for ZyXEL ZyWall 10

MAC filtering allows you to restrict access to your ZyXEL ZyWall 10 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZyXEL ZyWall 10 router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for ZyXEL ZyWall 10 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Chasel IV.

    Yes, It works...

    Reply
  2. Hunter Dorothy

    Thank goodness!

    Reply