Default Password for ZyXEL P 660 D1 RoHS Router

To get access to ZyXEL P 660 D1 RoHS router, you need the login IP address of your router, the username, and password.

You can find these information in ZyXEL P 660 D1 RoHS router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the ZyXEL P 660 D1 RoHS Router

The ZyXEL P 660 D1 RoHS has a web interface for configuration. You can use any web browser you like to log in to the ZyXEL P 660 D1 RoHS router.

Put the Internal IP Address of your ZyXEL P 660 D1 RoHS in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZyXEL P 660 D1 RoHS login data.

Default login data for ZyXEL P 660 D1 RoHS

You need to know the username and password to log in to your ZyXEL P 660 D1 RoHS router. We listed below.

ModelIpUsername & Password
ZyXEL P 660 D1 RoHS192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other ZyXEL P 660 D1 RoHS Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of ZyXEL P 660 D1 RoHS Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to ZyXEL P 660 D1 RoHS Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the ZyXEL P 660 D1 RoHS Router To Default Settings

If you still can not get logged in, then you are probably going to reset your router to its default settings.

Change ZyXEL P 660 D1 RoHS Default Wifi Name (SSID)

By default, some ZyXEL P 660 D1 RoHS routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for ZyXEL P 660 D1 RoHS

MAC filtering allows you to restrict access to your ZyXEL P 660 D1 RoHS router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZyXEL P 660 D1 RoHS router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for ZyXEL P 660 D1 RoHS router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

19 − ten =

  1. Noel Joshua

    It really helped me!

    Reply
  2. Joyce Tomlinson

    Thank goodness!

    Reply