Default Password for ZyXEL P 2602HWT Router

To get access to ZyXEL P 2602HWT router, you need the login IP address of your router, the username, and password.

You can find these data in ZyXEL P 2602HWT router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the ZyXEL P 2602HWT Router

The ZyXEL P 2602HWT has a web interface for configuration. You can use any web browser you like to log in to the ZyXEL P 2602HWT router.

Put the IP Address(without “http://” or “https://”) of your ZyXEL P 2602HWT in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZyXEL P 2602HWT login data.

Default login data for ZyXEL P 2602HWT

You need to know the username and password to log in to your ZyXEL P 2602HWT router. We listed below.

ModelIpUsername & Password
ZyXEL P 2602HWT192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other ZyXEL P 2602HWT Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of ZyXEL P 2602HWT Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to ZyXEL P 2602HWT Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the ZyXEL P 2602HWT Router To Default Settings

If you still can not get logged in, then you have to reset your router to its default settings.

Change ZyXEL P 2602HWT Default Wifi Name (SSID)

By default, some ZyXEL P 2602HWT routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for ZyXEL P 2602HWT

MAC filtering allows you to restrict access to your ZyXEL P 2602HWT router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZyXEL P 2602HWT router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for ZyXEL P 2602HWT router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

five + thirteen =

  1. Yehudi Gallup

    thanks

    Reply
  2. Winston Hearst

    3Q

    Reply