Default Password for Zoom 4402 Router

To get access to Zoom 4402 router, you need the login IP address of your router, the username, and password.

You can find these data in Zoom 4402 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Zoom 4402 Router

The Zoom 4402 has a web interface for configuration. You can use any web browser you like to log in to the Zoom 4402 router.

Put the IP Address(without “http://” or “https://”) of your Zoom 4402 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Zoom 4402 login data.

Default login data for Zoom 4402

You need to know the username and password to log in to your Zoom 4402 router. We listed below.

ModelIpUsername & Password
Zoom 4402192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Zoom 4402 Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Zoom 4402 Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to Zoom 4402 Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Zoom 4402 Router To Default Settings

If you still can not get logged in, then you are probably going to reset your router to its default settings.

Change Zoom 4402 Default Wifi Name (SSID)

By default, some Zoom 4402 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Zoom 4402

MAC filtering allows you to restrict access to your Zoom 4402 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Zoom 4402 router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Zoom 4402 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

2 × 1 =

  1. Valerie Jane

    Thank you!

    Reply
  2. Tabitha Symons

    Thank you!

    Reply