Default Password for Western Digital N900 Router

To get access to Western Digital N900 router, you need the login IP address of your router, the username, and password.

You can find these information in Western Digital N900 router manual. But if you lost it, then you can use the quick guide below.

Login to the Western Digital N900 Router

The Western Digital N900 has a web interface for configuration. You can use any web browser you like to log in to the Western Digital N900 router.

Put the IP Address(without “http://” or “https://”) of your Western Digital N900 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Western Digital N900 login data.

Default login data for Western Digital N900

You need to know the username and password to log in to your Western Digital N900 router. We listed below.

ModelIpUsername & Password
Western Digital N900192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Western Digital N900 Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Western Digital N900 Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to Western Digital N900 Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Western Digital N900 Router To Default Settings

If you still can not get logged in, then you have to reset your router to its default settings.

Change Western Digital N900 Default Wifi Name (SSID)

By default, some Western Digital N900 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Western Digital N900

MAC filtering allows you to restrict access to your Western Digital N900 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Western Digital N900 router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Western Digital N900 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

twenty − seventeen =

  1. Dunn Jane

    It really helped me!

  2. Isabel Augustus

    While I searched all over the world for the default password of this damn router, I find it here.