Default Password for Trendnet TE100-MP2U Router

To get access to Trendnet TE100-MP2U router, you need the login IP address of your router, the username, and password.

You can find these info in Trendnet TE100-MP2U router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Trendnet TE100-MP2U Router

The Trendnet TE100-MP2U has a web interface for configuration. You can use any web browser to log in to the Trendnet TE100-MP2U router.

Put the Internal IP Address of your Trendnet TE100-MP2U in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Trendnet TE100-MP2U login username & password.

Default login data for Trendnet TE100-MP2U

You need to know the username and password to log in to your Trendnet TE100-MP2U router. We listed below.

ModelIpUsername & Password
Trendnet TE100-MP2U192.168.0.1Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Trendnet TE100-MP2U Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Trendnet TE100-MP2U Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Trendnet TE100-MP2U router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Trendnet TE100-MP2U Router To Default Settings?

If you can’t login the setup page of router, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Trendnet TE100-MP2U Default Wifi Name (SSID)

By default, some Trendnet TE100-MP2U routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Trendnet TE100-MP2U

MAC filtering allows you to restrict access to your Trendnet TE100-MP2U router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Trendnet TE100-MP2U router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Trendnet TE100-MP2U router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

two × two =

  1. Clara Hodgson

    Yes, It works…

    Reply
  2. Blair Tomlinson

    Thank you!

    Reply
  3. Bblythe Lynch

    thanks

    Reply