Default Password for Topcom WBR 7001g Router

To get access to Topcom WBR 7001g router, you need the login IP address of your router, the username, and password.

You can find these data in Topcom WBR 7001g router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Topcom WBR 7001g Router

The Topcom WBR 7001g has a web interface for configuration. You can use any web browser you like to log in to the Topcom WBR 7001g router.

Put the IP Address(without “http://” or “https://”) of your Topcom WBR 7001g in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Topcom WBR 7001g login infomation.

Default login data for Topcom WBR 7001g

You need to know the username and password to log in to your Topcom WBR 7001g router. We listed below.

ModelIpUsername & Password
Topcom WBR 7001g192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Topcom WBR 7001g Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Topcom WBR 7001g Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to Topcom WBR 7001g Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Topcom WBR 7001g Router To Default Settings

If you still can not get logged in, then you are probably going to reset your router to its factory settings.

Change Topcom WBR 7001g Default Wifi Name (SSID)

By default, some Topcom WBR 7001g routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Topcom WBR 7001g

MAC filtering allows you to restrict access to your Topcom WBR 7001g router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Topcom WBR 7001g router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Topcom WBR 7001g router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

eleven − nine =

  1. Marshall Palmer

    Yes, It works…

  2. Brian Joel

    Thank goodness!