Default Password for Topcom WBR 254 Router

To get access to Topcom WBR 254 router, you need the login IP address of your router, the username, and password.

You can find these information in Topcom WBR 254 router manual. But if you lost it, then you can use the quick guide below.

Login to the Topcom WBR 254 Router

The Topcom WBR 254 has a web interface for configuration. You can use any web browser you like to log in to the Topcom WBR 254 router.

Put the IP Address(without "http://" or "https://") of your Topcom WBR 254 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Topcom WBR 254 login data.

Default login data for Topcom WBR 254

You need to know the username and password to log in to your Topcom WBR 254 router. We listed below.

ModelIpUsername & Password
Topcom WBR 254192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Topcom WBR 254 Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Topcom WBR 254 Doesn't Work

You should try the other same brands' passwords. We have a large list of Brands' Passwords that you can have a try to check. Perhaps your router's default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to Topcom WBR 254 Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router's login data are, or maybe they can reset it for you.

How to Reset the Topcom WBR 254 Router To Default Settings

If you still can not get logged in, then you are probably going to reset your router to its default settings.

Change Topcom WBR 254 Default Wifi Name (SSID)

By default, some Topcom WBR 254 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router's brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Topcom WBR 254

MAC filtering allows you to restrict access to your Topcom WBR 254 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Topcom WBR 254 router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Topcom WBR 254 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Alger Dutt

    3Q

    Reply
  2. Claire Wallace

    thanks

    Reply