Default Password for Technicolor TG800vac Router

To get access to Technicolor TG800vac router, you need the login IP address of your router, the username, and password.

You can find these data in Technicolor TG800vac router manual. But if you lost it, then you can use the quick guide below.

Login to the Technicolor TG800vac Router

The Technicolor TG800vac has a web interface for configuration. You can use any web browser you like to log in to the Technicolor TG800vac router.

Put the Login IP Address of your Technicolor TG800vac in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Technicolor TG800vac login data.

Default login data for Technicolor TG800vac

You need to know the username and password to log in to your Technicolor TG800vac router. We listed below.

ModelIpUsername & Password
Technicolor TG800vac192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Technicolor TG800vac Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Technicolor TG800vac Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to Technicolor TG800vac Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Technicolor TG800vac Router To Default Settings

If you still can not get logged in, then you are probably going to reset your router to its factory settings.

Change Technicolor TG800vac Default Wifi Name (SSID)

By default, some Technicolor TG800vac routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Technicolor TG800vac

MAC filtering allows you to restrict access to your Technicolor TG800vac router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Technicolor TG800vac router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Technicolor TG800vac router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

eight + ten =

  1. Tiffany Lawson

    Thank you!

    Reply
  2. Nat Lawson

    3Q

    Reply