Default Password for SMC SMCD3G-CCR Router

To get access to SMC SMCD3G-CCR router, you need the login IP address of your router, the username, and password.

You can find these data in SMC SMCD3G-CCR router manual. But if you lost it, then you can use the quick guide below.

Login to the SMC SMCD3G-CCR Router

The SMC SMCD3G-CCR has a web interface for configuration. You can use any web browser you like to log in to the SMC SMCD3G-CCR router.

Put the IP Address(without “http://” or “https://”) of your SMC SMCD3G-CCR in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your SMC SMCD3G-CCR login username & password.

Default login data for SMC SMCD3G-CCR

You need to know the username and password to log in to your SMC SMCD3G-CCR router. We listed below.

ModelIpUsername & Password
SMC SMCD3G-CCR192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other SMC SMCD3G-CCR Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of SMC SMCD3G-CCR Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to SMC SMCD3G-CCR Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the SMC SMCD3G-CCR Router To Default Settings

If you still can not get logged in, then you are probably going to reset your router to its factory settings.

Change SMC SMCD3G-CCR Default Wifi Name (SSID)

By default, some SMC SMCD3G-CCR routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for SMC SMCD3G-CCR

MAC filtering allows you to restrict access to your SMC SMCD3G-CCR router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your SMC SMCD3G-CCR router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for SMC SMCD3G-CCR router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Sara Bird

    Thank you!

  2. Bart IV.