Default Password for SMC SMC2804WBRP-G Router

To get access to SMC SMC2804WBRP-G router, you need the login IP address of your router, the username, and password.

You can find these information in SMC SMC2804WBRP-G router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the SMC SMC2804WBRP-G Router

The SMC SMC2804WBRP-G has a web interface for configuration. You can use any web browser you like to log in to the SMC SMC2804WBRP-G router.

Put the IP Address(without “http://” or “https://”) of your SMC SMC2804WBRP-G in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your SMC SMC2804WBRP-G login username & password.

Default login data for SMC SMC2804WBRP-G

You need to know the username and password to log in to your SMC SMC2804WBRP-G router. We listed below.

ModelIpUsername & Password
SMC SMC2804WBRP-G192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other SMC SMC2804WBRP-G Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of SMC SMC2804WBRP-G Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to SMC SMC2804WBRP-G Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the SMC SMC2804WBRP-G Router To Default Settings

If you still can not get logged in, then you have to reset your router to its factory settings.

Change SMC SMC2804WBRP-G Default Wifi Name (SSID)

By default, some SMC SMC2804WBRP-G routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for SMC SMC2804WBRP-G

MAC filtering allows you to restrict access to your SMC SMC2804WBRP-G router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your SMC SMC2804WBRP-G router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for SMC SMC2804WBRP-G router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

ten − seven =

  1. Simon Robinson

    Yes, It works…

  2. Daisy Ricardo

    Yes, It works…