Default Password for Siemens Gigaset 204A Router

To get access to Siemens Gigaset 204A router, you need the login IP address of your router, the username, and password.

You can find these information in Siemens Gigaset 204A router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Siemens Gigaset 204A Router

The Siemens Gigaset 204A has a web interface for configuration. You can use any web browser you like to log in to the Siemens Gigaset 204A router.

Put the Login IP Address of your Siemens Gigaset 204A in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Siemens Gigaset 204A login infomation.

Default login data for Siemens Gigaset 204A

You need to know the username and password to log in to your Siemens Gigaset 204A router. We listed below.

ModelIpUsername & Password
Siemens Gigaset 204A192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Siemens Gigaset 204A Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Siemens Gigaset 204A Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

Forgot Password to Siemens Gigaset 204A Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Siemens Gigaset 204A Router To Default Settings

If you still can not get logged in, then you have to reset your router to its default settings.

Change Siemens Gigaset 204A Default Wifi Name (SSID)

By default, some Siemens Gigaset 204A routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Siemens Gigaset 204A

MAC filtering allows you to restrict access to your Siemens Gigaset 204A router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Siemens Gigaset 204A router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Siemens Gigaset 204A router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Emily Brewster

    Yes, It works…

    Reply
  2. Simona Godwin

    Thank goodness!

    Reply