Default Password for Prolink H5004N Router

To get access to Prolink H5004N router, you need the login IP address of your router, the username, and password.

You can find these info in Prolink H5004N router manual. But if you do not have the manual for your router, then you can use the quick guide below.

The Prolink H5004N has a web interface for configuration. You can use any web browser you like to log in to the Prolink H5004N router.

Put the Internal IP Address of your Prolink H5004N in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Prolink H5004N login username & password.

You need to know the username and password to log in to your Prolink H5004N router. We listed below.

ModelIpUsername & Password
Prolink H5004N192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

If you can not get a login to your router, here are a few possible solutions you can try.

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

If you still can not get logged in, then you are probably going to reset your router to its default settings.

By default, some Prolink H5004N routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Prolink H5004N

MAC filtering allows you to restrict access to your Prolink H5004N router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Prolink H5004N router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Prolink H5004N router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Rosemary Palmer

    Yes, It works…

    Reply
  2. Jared Anderson

    Thank you!

    Reply