Default Password for Prolink 9200S Router

To get access to Prolink 9200S router, you need the login IP address of your router, the username, and password.

You can find these information in Prolink 9200S router manual. But if you lost it, then you can use the quick guide below.

The Prolink 9200S has a web interface for configuration. You can use any web browser you like to log in to the Prolink 9200S router.

Put the Login IP Address of your Prolink 9200S in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Prolink 9200S login data.

You need to know the username and password to log in to your Prolink 9200S router. We listed below.

ModelIpUsername & Password
Prolink 9200S192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

If you can’t get a login to your router, here are some possible solutions you can try.

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

If you still can not get logged in, then you have to reset your router to its default settings.

By default, some Prolink 9200S routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Prolink 9200S

MAC filtering allows you to restrict access to your Prolink 9200S router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Prolink 9200S router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Prolink 9200S router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Dunn Lincoln

    Yes, It works…

    Reply
  2. Eli Back

    Thank goodness!

    Reply