Default Password for Netis WF2411 Router

To get access to Netis WF2411 router, you need the login IP address of your router, the username, and password.

You can find these information in Netis WF2411 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Netis WF2411 Router

The Netis WF2411 has a web interface for configuration. You can use any web browser to log in to the Netis WF2411 router.

Put the IP Address(without “http://” or “https://”) of your Netis WF2411 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Netis WF2411 login infomation.

Default login data for Netis WF2411

You need to know the username and password to log in to your Netis WF2411 router. We listed below.

ModelIpUsername & Password
Netis WF2411192.168.1.1Username:admin/ Password:password

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Netis WF2411 Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Netis WF2411 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Netis WF2411 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Netis WF2411 Router To Default Settings?

If you can’t login the setup page of router, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Netis WF2411 Default Wifi Name (SSID)

By default, some Netis WF2411 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Netis WF2411

MAC filtering allows you to restrict access to your Netis WF2411 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Netis WF2411 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Netis WF2411 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

three + 18 =

  1. Joyce Sara(h)

    It really helped me!

  2. Maggie Walton


  3. Tim Attlee

    Thank you!