Default Password for Netgear wgt634u Router

To get access to Netgear wgt634u router, you need the login IP address of your router, the username, and password.

You can find these info in Netgear wgt634u router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Netgear wgt634u Router

The Netgear wgt634u has a web interface for configuration. You can use any web browser to log in to the Netgear wgt634u router.

Put the Internal IP Address of your Netgear wgt634u in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Netgear wgt634u login infomation.

Default login data for Netgear wgt634u

You need to know the username and password to log in to your Netgear wgt634u router. We listed below.

ModelIpUsername & Password
Netgear wgt634u192.168.1.1Username:admin/ Password:password

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Netgear wgt634u Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Netgear wgt634u Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Netgear wgt634u router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Netgear wgt634u Router To Default Settings?

If you still can not login the setup page of router, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Netgear wgt634u Default Wifi Name (SSID)

By default, some Netgear wgt634u routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Netgear wgt634u

MAC filtering allows you to restrict access to your Netgear wgt634u router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Netgear wgt634u router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Netgear wgt634u router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

four + fifteen =

  1. Sara Dorothea

    Thank you!

    Reply
  2. Chester Godwin

    Yes, It works…

    Reply
  3. Emily Dutt

    thanks

    Reply