Default Password for Netgear C3700-100NAS Router

To get access to Netgear C3700-100NAS router, you need the login IP address of your router, the username, and password.

You can find these information in Netgear C3700-100NAS router manual. But if you lost it, then you can use the quick guide below.

Login to the Netgear C3700-100NAS Router

The Netgear C3700-100NAS has a web interface for configuration. You can use any web browser you like to log in to the Netgear C3700-100NAS router.

Put the Login IP Address of your Netgear C3700-100NAS in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Netgear C3700-100NAS login infomation.

Default login data for Netgear C3700-100NAS

You need to know the username and password to log in to your Netgear C3700-100NAS router. We listed below.

ModelIpUsername & Password
Netgear C3700-100NAS192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Netgear C3700-100NAS Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of Netgear C3700-100NAS Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to Netgear C3700-100NAS Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Netgear C3700-100NAS Router To Default Settings

If you still can not get logged in, then you have to reset your router to its factory settings.

Change Netgear C3700-100NAS Default Wifi Name (SSID)

By default, some Netgear C3700-100NAS routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Netgear C3700-100NAS

MAC filtering allows you to restrict access to your Netgear C3700-100NAS router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Netgear C3700-100NAS router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Netgear C3700-100NAS router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Alger Jane

    3Q

    Reply
  2. Juliet Hodgson

    Yes, It works…

    Reply