Default Password for Netcomm NB5580W Router

To get access to Netcomm NB5580W router, you need the login IP address of your router, the username, and password.

You can find these info in Netcomm NB5580W router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Netcomm NB5580W Router

The Netcomm NB5580W has a web interface for configuration. You can use any web browser you like to log in to the Netcomm NB5580W router.

Put the Internal IP Address of your Netcomm NB5580W in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Netcomm NB5580W login infomation.

Default login data for Netcomm NB5580W

You need to know the username and password to log in to your Netcomm NB5580W router. We listed below.

ModelIpUsername & Password
Netcomm NB5580W192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Netcomm NB5580W Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of Netcomm NB5580W Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

Forgot Password to Netcomm NB5580W Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Netcomm NB5580W Router To Default Settings

If you still can not get logged in, then you are probably going to reset your router to its factory settings.

Change Netcomm NB5580W Default Wifi Name (SSID)

By default, some Netcomm NB5580W routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Netcomm NB5580W

MAC filtering allows you to restrict access to your Netcomm NB5580W router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Netcomm NB5580W router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Netcomm NB5580W router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Isabel Richards

    Thank goodness!

    Reply
  2. Emily Hodgson

    Thank goodness!

    Reply