Default Password for Netcomm NB5 Plus 4W Router

To get access to Netcomm NB5 Plus 4W router, you need the login IP address of your router, the username, and password.

You can find these information in Netcomm NB5 Plus 4W router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Netcomm NB5 Plus 4W Router

The Netcomm NB5 Plus 4W has a web interface for configuration. You can use any web browser you like to log in to the Netcomm NB5 Plus 4W router.

Put the Login IP Address of your Netcomm NB5 Plus 4W in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Netcomm NB5 Plus 4W login infomation.

Default login data for Netcomm NB5 Plus 4W

You need to know the username and password to log in to your Netcomm NB5 Plus 4W router. We listed below.

ModelIpUsername & Password
Netcomm NB5 Plus 4W192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Netcomm NB5 Plus 4W Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Netcomm NB5 Plus 4W Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to Netcomm NB5 Plus 4W Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Netcomm NB5 Plus 4W Router To Default Settings

If you still can not get logged in, then you are probably going to reset your router to its default settings.

Change Netcomm NB5 Plus 4W Default Wifi Name (SSID)

By default, some Netcomm NB5 Plus 4W routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Netcomm NB5 Plus 4W

MAC filtering allows you to restrict access to your Netcomm NB5 Plus 4W router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Netcomm NB5 Plus 4W router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Netcomm NB5 Plus 4W router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Jennifer Lawson

    thanks

    Reply
  2. Emily Roy

    It really helped me!

    Reply