Default Password for Inteno DG301 iopsys Router

To get access to Inteno DG301 iopsys router, you need the login IP address of your router, the username, and password.

You can find these info in Inteno DG301 iopsys router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Inteno DG301 iopsys Router

The Inteno DG301 iopsys has a web interface for configuration. You can use any web browser you like to log in to the Inteno DG301 iopsys router.

Put the Login IP Address of your Inteno DG301 iopsys in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Inteno DG301 iopsys login infomation.

Default login data for Inteno DG301 iopsys

You need to know the username and password to log in to your Inteno DG301 iopsys router. We listed below.

ModelIpUsername & Password
Inteno DG301 iopsys192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Inteno DG301 iopsys Login Problems

If you can't get a login to your router, here are some possible solutions you can try.

The Password of Inteno DG301 iopsys Doesn't Work

You should try the other same brands' passwords. We have a large list of Brands' Passwords that you can have a try to check. Perhaps your router's default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

Forgot Password to Inteno DG301 iopsys Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router's login data are, or maybe they can reset it for you.

How to Reset the Inteno DG301 iopsys Router To Default Settings

If you still can not get logged in, then you have to reset your router to its default settings.

Change Inteno DG301 iopsys Default Wifi Name (SSID)

By default, some Inteno DG301 iopsys routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router's brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Inteno DG301 iopsys

MAC filtering allows you to restrict access to your Inteno DG301 iopsys router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Inteno DG301 iopsys router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Inteno DG301 iopsys router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Oswald Edie

    thanks

    Reply
  2. Belle IV.

    While I searched all over the world for the default password of this damn router, I find it here.

    Reply