Default Password for Inteno DG150A Router

To get access to Inteno DG150A router, you need the login IP address of your router, the username, and password.

You can find these data in Inteno DG150A router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Inteno DG150A Router

The Inteno DG150A has a web interface for configuration. You can use any web browser you like to log in to the Inteno DG150A router.

Put the Internal IP Address of your Inteno DG150A in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Inteno DG150A login data.

Default login data for Inteno DG150A

You need to know the username and password to log in to your Inteno DG150A router. We listed below.

ModelIpUsername & Password
Inteno DG150A192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Inteno DG150A Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Inteno DG150A Doesn't Work

You should try the other same brands' passwords. We have a large list of Brands' Passwords that you can have a try to check. Perhaps your router's default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to Inteno DG150A Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router's login information are, or maybe they can reset it for you.

How to Reset the Inteno DG150A Router To Default Settings

If you still can not get logged in, then you are probably going to reset your router to its default settings.

Change Inteno DG150A Default Wifi Name (SSID)

By default, some Inteno DG150A routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router's brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Inteno DG150A

MAC filtering allows you to restrict access to your Inteno DG150A router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Inteno DG150A router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Inteno DG150A router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Rosemary Symons

    3Q

    Reply
  2. Simon Andrew

    Thank goodness!

    Reply