Default Password for Gennet OxyGEN RFA1400.W Router

To get access to Gennet OxyGEN RFA1400.W router, you need the login IP address of your router, the username, and password.

You can find these data in Gennet OxyGEN RFA1400.W router manual. But if you lost it, then you can use the quick guide below.

Login to the Gennet OxyGEN RFA1400.W Router

The Gennet OxyGEN RFA1400.W has a web interface for configuration. You can use any web browser you like to log in to the Gennet OxyGEN RFA1400.W router.

Put the IP Address(without "http://" or "https://") of your Gennet OxyGEN RFA1400.W in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Gennet OxyGEN RFA1400.W login username & password.

Default login data for Gennet OxyGEN RFA1400.W

You need to know the username and password to log in to your Gennet OxyGEN RFA1400.W router. We listed below.

ModelIpUsername & Password
Gennet OxyGEN RFA1400.W192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Gennet OxyGEN RFA1400.W Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Gennet OxyGEN RFA1400.W Doesn't Work

You should try the other same brands' passwords. We have a large list of Brands' Passwords that you can have a try to check. Perhaps your router's default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

Forgot Password to Gennet OxyGEN RFA1400.W Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router's username and password are, or maybe they can reset it for you.

How to Reset the Gennet OxyGEN RFA1400.W Router To Default Settings

If you still can not get logged in, then you have to reset your router to its default settings.

Change Gennet OxyGEN RFA1400.W Default Wifi Name (SSID)

By default, some Gennet OxyGEN RFA1400.W routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router's brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Gennet OxyGEN RFA1400.W

MAC filtering allows you to restrict access to your Gennet OxyGEN RFA1400.W router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Gennet OxyGEN RFA1400.W router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Gennet OxyGEN RFA1400.W router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Joyce Delia

    Thank goodness!

    Reply
  2. Alma Roy

    Thank goodness!

    Reply