Default Password for FRITZ BOX WLAN 7490 Router

To get access to FRITZ BOX WLAN 7490 router, you need the login IP address of your router, the username, and password.

You can find these data in FRITZ BOX WLAN 7490 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the FRITZ BOX WLAN 7490 Router

The FRITZ BOX WLAN 7490 has a web interface for configuration. You can use any web browser you like to log in to the FRITZ BOX WLAN 7490 router.

Put the Login IP Address of your FRITZ BOX WLAN 7490 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your FRITZ BOX WLAN 7490 login data.

Default login data for FRITZ BOX WLAN 7490

You need to know the username and password to log in to your FRITZ BOX WLAN 7490 router. We listed below.

ModelIpUsername & Password
FRITZ BOX WLAN 7490192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other FRITZ BOX WLAN 7490 Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of FRITZ BOX WLAN 7490 Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

Forgot Password to FRITZ BOX WLAN 7490 Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the FRITZ BOX WLAN 7490 Router To Default Settings

If you still can not get logged in, then you are probably going to reset your router to its factory settings.

Change FRITZ BOX WLAN 7490 Default Wifi Name (SSID)

By default, some FRITZ BOX WLAN 7490 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for FRITZ BOX WLAN 7490

MAC filtering allows you to restrict access to your FRITZ BOX WLAN 7490 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your FRITZ BOX WLAN 7490 router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for FRITZ BOX WLAN 7490 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Lisa Robinson

    Thank you!

    Reply
  2. Clara Joshua

    Yes, It works…

    Reply