Default Password for FRITZ BOX WLAN 7170-EN Router

To get access to FRITZ BOX WLAN 7170-EN router, you need the login IP address of your router, the username, and password.

You can find these information in FRITZ BOX WLAN 7170-EN router manual. But if you lost it, then you can use the quick guide below.

Login to the FRITZ BOX WLAN 7170-EN Router

The FRITZ BOX WLAN 7170-EN has a web interface for configuration. You can use any web browser you like to log in to the FRITZ BOX WLAN 7170-EN router.

Put the Login IP Address of your FRITZ BOX WLAN 7170-EN in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your FRITZ BOX WLAN 7170-EN login username & password.

Default login data for FRITZ BOX WLAN 7170-EN

You need to know the username and password to log in to your FRITZ BOX WLAN 7170-EN router. We listed below.

ModelIpUsername & Password
FRITZ BOX WLAN 7170-EN192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other FRITZ BOX WLAN 7170-EN Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of FRITZ BOX WLAN 7170-EN Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to FRITZ BOX WLAN 7170-EN Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the FRITZ BOX WLAN 7170-EN Router To Default Settings

If you still can not get logged in, then you are probably going to reset your router to its default settings.

Change FRITZ BOX WLAN 7170-EN Default Wifi Name (SSID)

By default, some FRITZ BOX WLAN 7170-EN routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for FRITZ BOX WLAN 7170-EN

MAC filtering allows you to restrict access to your FRITZ BOX WLAN 7170-EN router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your FRITZ BOX WLAN 7170-EN router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for FRITZ BOX WLAN 7170-EN router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Dempsey Henrietta

    While I searched all over the world for the default password of this damn router, I find it here.

  2. Michael Twain

    It really helped me!