Default Password for Ericsson hn290dp Router

To get access to Ericsson hn290dp router, you need the login IP address of your router, the username, and password.

You can find these information in Ericsson hn290dp router manual. But if you lost it, then you can use the quick guide below.

Login to the Ericsson hn290dp Router

The Ericsson hn290dp has a web interface for configuration. You can use any web browser you like to log in to the Ericsson hn290dp router.

Put the Internal IP Address of your Ericsson hn290dp in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Ericsson hn290dp login data.

Default login data for Ericsson hn290dp

You need to know the username and password to log in to your Ericsson hn290dp router. We listed below.

ModelIpUsername & Password
Ericsson hn290dp192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Ericsson hn290dp Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Ericsson hn290dp Doesn’t Work

You should try the other same brands’ passwords. We have a large list of Brands’ Passwords that you can have a try to check. Perhaps your router’s default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to Ericsson hn290dp Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Ericsson hn290dp Router To Default Settings

If you still can not get logged in, then you have to reset your router to its default settings.

Change Ericsson hn290dp Default Wifi Name (SSID)

By default, some Ericsson hn290dp routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Ericsson hn290dp

MAC filtering allows you to restrict access to your Ericsson hn290dp router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Ericsson hn290dp router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Ericsson hn290dp router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Elliot Haggai

    thanks

    Reply
  2. Erin Carroll

    Thank goodness!

    Reply