Default Password for Dlink DSL-124 Router

To get access to Dlink DSL-124 router, you need the login IP address of your router, the username, and password.

You can find these info in Dlink DSL-124 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

The Dlink DSL-124 has a web interface for configuration. You can use any web browser to log in to the Dlink DSL-124 router.

Put the Login IP Address of your Dlink DSL-124 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Dlink DSL-124 login infomation.

You need to know the username and password to log in to your Dlink DSL-124 router. We listed below.

ModelIpUsername & Password
Dlink DSL-124192.168.1.1Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

If you can’t get a login to your router, here are a few possible solutions you can try.

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

If you can not access the router’s setup page, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

By default, some Dlink DSL-124 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Dlink DSL-124

MAC filtering allows you to restrict access to your Dlink DSL-124 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Dlink DSL-124 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Dlink DSL-124 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

12 − 6 =

  1. Stephanie Hodgson

    Thank you!

    Reply
  2. Daisy Webster

    Yes, It works…

    Reply
  3. Alvin Lucius

    It really helped me!

    Reply