Default Password for Dlink DGS-3224TGR Router

To get access to Dlink DGS-3224TGR router, you need the login IP address of your router, the username, and password.

You can find these info in Dlink DGS-3224TGR router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

The Dlink DGS-3224TGR has a web interface for configuration. You can use any web browser to log in to the Dlink DGS-3224TGR router.

Put the IP Address(without “http://” or “https://”) of your Dlink DGS-3224TGR in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Dlink DGS-3224TGR login username & password.

You need to know the username and password to log in to your Dlink DGS-3224TGR router. We listed below.

ModelIpUsername & Password
Dlink DGS-3224TGR10.90.90.90Username:(none)/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

If you can’t get a login to your router, here are a few possible solutions you can try.

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

If you can not get logged in, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

By default, some Dlink DGS-3224TGR routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Dlink DGS-3224TGR

MAC filtering allows you to restrict access to your Dlink DGS-3224TGR router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Dlink DGS-3224TGR router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 10.90.90.90 on the address.
  2. Enter the username and password for Dlink DGS-3224TGR router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

four × 3 =

  1. Dunn Lucius

    Yes, It works…

    Reply
  2. Coral Ingersoll

    Thank you!

    Reply
  3. Chasel Webster

    Thank goodness!

    Reply