Default Password for CBN CH7486E Router

To get access to CBN CH7486E router, you need the login IP address of your router, the username, and password.

You can find these information in CBN CH7486E router manual. But if you lost it, then you can use the quick guide below.

Login to the CBN CH7486E Router

The CBN CH7486E has a web interface for configuration. You can use any web browser you like to log in to the CBN CH7486E router.

Put the IP Address(without "http://" or "https://") of your CBN CH7486E in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your CBN CH7486E login data.

Default login data for CBN CH7486E

You need to know the username and password to log in to your CBN CH7486E router. We listed below.

ModelIpUsername & Password
CBN CH7486E192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other CBN CH7486E Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of CBN CH7486E Doesn't Work

You should try the other same brands' passwords. We have a large list of Brands' Passwords that you can have a try to check. Perhaps your router's default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to CBN CH7486E Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router's login data are, or maybe they can reset it for you.

How to Reset the CBN CH7486E Router To Default Settings

If you still can not get logged in, then you have to reset your router to its default settings.

Change CBN CH7486E Default Wifi Name (SSID)

By default, some CBN CH7486E routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router's brand, which makes it easier for hackers.

Configure Wireless MAC address filter for CBN CH7486E

MAC filtering allows you to restrict access to your CBN CH7486E router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your CBN CH7486E router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for CBN CH7486E router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Blair Gallup


  2. Juliet Noel

    Thank goodness!