Default Password for Buffalo WCR-GN Router

To get access to Buffalo WCR-GN router, you need the login IP address of your router, the username, and password.

You can find these data in Buffalo WCR-GN router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Buffalo WCR-GN Router

The Buffalo WCR-GN has a web interface for configuration. You can use any web browser you like to log in to the Buffalo WCR-GN router.

Put the Internal IP Address of your Buffalo WCR-GN in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Buffalo WCR-GN login data.

Default login data for Buffalo WCR-GN

You need to know the username and password to log in to your Buffalo WCR-GN router. We listed below.

ModelIpUsername & Password
Buffalo WCR-GN192.168.1.1[Show username & password]

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Buffalo WCR-GN Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Buffalo WCR-GN Doesn't Work

You should try the other same brands' passwords. We have a large list of Brands' Passwords that you can have a try to check. Perhaps your router's default password is different than what we have listed here. Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of router.

Forgot Password to Buffalo WCR-GN Router

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router's username and password are, or maybe they can reset it for you.

How to Reset the Buffalo WCR-GN Router To Default Settings

If you still can not get logged in, then you have to reset your router to its default settings.

Change Buffalo WCR-GN Default Wifi Name (SSID)

By default, some Buffalo WCR-GN routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router's brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Buffalo WCR-GN

MAC filtering allows you to restrict access to your Buffalo WCR-GN router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Buffalo WCR-GN router. Be sure to update this information when adding or removing devices.

How to configure:

  1. Open the web browser and type the IP address.
  2. Enter the username and password for Buffalo WCR-GN router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Rate article
Add a comment

  1. Chasel Carroll

    3Q

    Reply
  2. Emily Brewster

    Thank you!

    Reply